{"title":"Brazing \u0026 Soldering Rods","description":"\u003ch1\u003eBrazing Rods \u0026amp; Silver Solder for Copper Pipe \u0026amp; HVAC\u003c\/h1\u003e\n\u003cp\u003eSilver solder brazing rods and general-purpose brazing rods for copper pipe jointing in air conditioning, refrigeration, plumbing, and industrial installations. Lawton flux-coated and bare silver solder rods in a full range of silver content from AG0.2% to AG56%. Same-day dispatch from UK stock.\u003c\/p\u003e\n\u003ch2\u003eChoosing the Right Silver Content\u003c\/h2\u003e\n\u003cp\u003eSilver content determines the melting temperature, flow characteristics, and joint strength of the brazing alloy. Higher silver content generally means lower melting temperature and better flow — but higher cost per rod.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAG0.2% (S2)\u003c\/strong\u003e — low silver content for general industrial brazing, where cost is the primary consideration. The Javac S2 1kg pack is the trade standard for AC and refrigeration copper pipe brazing on non-critical joints.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAG2% – AG5%\u003c\/strong\u003e — entry-level silver solder for general copper and brass brazing in plumbing and HVAC. Suitable for most standard pipe joints.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAG15% – AG30%\u003c\/strong\u003e — mid-range silver content for improved flow and joint quality on copper refrigerant pipework. Recommended for AC and refrigeration installations where joint integrity is critical.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAG40% – AG56%\u003c\/strong\u003e — high silver content for demanding applications requiring excellent flow, low melting temperature, and maximum joint strength. AG56% flux-coated rods are the premium choice for tight-clearance refrigerant joints and stainless steel brazing.\u003c\/p\u003e\n\u003ch2\u003eFlux-Coated vs Bare Rods\u003c\/h2\u003e\n\u003cp\u003eFlux-coated rods (AG56%) have flux applied to the rod surface — no separate flux paste required for most applications. Bare rods require separate brazing flux applied to the joint before heating. Always use the correct flux for the alloy and base metal combination.\u003c\/p\u003e\n\u003cp\u003eBrowse \u003ca href=\"\/collections\/brazing-flux-welding-compounds\"\u003eBrazing Flux \u0026amp; Soldering Compounds\u003c\/a\u003e for flux paste and solder wire. Browse \u003ca href=\"\/collections\/brazing-heat-protection\"\u003eBrazing Heat Protection\u003c\/a\u003e for heat deflectors and barrier sprays. \u003ca href=\"\/collections\/brazing-soldering-welding\"\u003eBrowse all Brazing \u0026amp; Soldering Equipment\u003c\/a\u003e. Trade accounts available — call 0161 775 1190 for volume pricing on brazing rods.\u003c\/p\u003e","products":[{"product_id":"silver-solder-pack-of-5-sticks","title":"Silver Solder Pack of 5 sticks.","description":"\u003cp\u003eSilver solder sticks for brazing copper pipe joints in HVAC, refrigeration, and plumbing installations. Supplied as a pack of 5 sticks, these are a workshop and van staple for any HVAC engineer carrying out copper brazing work.\u003c\/p\u003e\u003cul\u003e \u003cli\u003eSKU: Z602\u003c\/li\u003e \u003cli\u003ePack of 5 sticks\u003c\/li\u003e \u003cli\u003eSuitable for brazing copper pipe joints\u003c\/li\u003e \u003cli\u003eFor use in HVAC, refrigeration, and plumbing installations\u003c\/li\u003e \u003cli\u003eCompatible with standard brazing torches\u003c\/li\u003e \u003c\/ul\u003e\u003cp\u003eA reliable, professional-grade silver solder for clean, strong copper brazed joints — an essential consumable for any HVAC or refrigeration engineer.\u003c\/p\u003e","brand":"Lawton Tubes","offers":[{"title":"Default Title","offer_id":57029490737529,"sku":"Z602","price":38.11,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0158\/3481\/files\/Silver-Solder-Pack-of-5-sticks-Ryan-Air-Conditioning-Spares-68944896131447.jpg?v=1775888491"},{"product_id":"javac-jav-s2-s2-brazing-rods-1kg","title":"Javac JAV-S2 S2 Brazing Rods 1kg | Self-Fluxing Copper Phosphorus | 500mm | Made in UK","description":"\u003ch2\u003eJavac JAV-S2 S2 Brazing Rods | 1kg Pack | Self-Fluxing Copper Phosphorus\u003c\/h2\u003e\u003cp\u003ePremium grade S2 self-fluxing copper phosphorus alloy brazing rods for HVAC and refrigeration copper pipework. Suitable for copper-to-copper and high copper content alloy joints without the need for additional flux. Made in the UK. Supplied in a 1kg pack of 500mm rods.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-Fluxing\u003c\/strong\u003e — no additional flux required for copper-to-copper joints; cleaner, faster brazing on site\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePremium Grade S2 Alloy\u003c\/strong\u003e — copper phosphorus alloy for strong, reliable brazed joints on HVAC copper pipework\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCopper-Copper \u0026amp; High Copper Content Alloys\u003c\/strong\u003e — suitable for all standard HVAC ACR copper tube and fittings\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e500mm Rod Length\u003c\/strong\u003e — standard length for HVAC brazing applications\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1kg Pack\u003c\/strong\u003e — trade quantity for regular site use\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade in the UK\u003c\/strong\u003e — manufactured to UK quality standards\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart Number:\u003c\/strong\u003e JAV-S2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEAN:\u003c\/strong\u003e 5060144941695\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTariff Code:\u003c\/strong\u003e 83113000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlloy Type:\u003c\/strong\u003e S2 Copper Phosphorus (self-fluxing)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMelting Range:\u003c\/strong\u003e Solidus 645°C \/ Liquidus 850°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRod Length:\u003c\/strong\u003e 500mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack Weight:\u003c\/strong\u003e 1kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSuitability:\u003c\/strong\u003e Copper-copper and high copper content alloys\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCountry of Origin:\u003c\/strong\u003e United Kingdom\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWarranty:\u003c\/strong\u003e 12 months\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eUsage Notes\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eSelf-fluxing on copper-to-copper joints — no additional flux required\u003c\/li\u003e\n\u003cli\u003eFor copper-to-brass or copper-to-bronze joints, use with an appropriate flux\u003c\/li\u003e\n\u003cli\u003eUse with oxy-acetylene, oxy-propane or air-acetylene torch\u003c\/li\u003e\n\u003cli\u003eEnsure nitrogen purge during brazing to prevent internal oxidation of HVAC pipework\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eRelated Products\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/javac-edge-flexi-torch-jav-1004\"\u003e\u003cstrong\u003eJAV-1004\u003c\/strong\u003e — Javac Edge Flexi Torch (MAPP\/Propane)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/javac-edge-oxy-acetylene-brazing-welding-toolkit-f23220001\"\u003e\u003cstrong\u003eF23220001\u003c\/strong\u003e — Javac Edge Oxy-Acetylene Brazing \u0026amp; Welding Toolkit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/javac-jav-1444-nitrogen-purge-tool\"\u003e\u003cstrong\u003eJAV-1444\u003c\/strong\u003e — Javac Nitrogen Purge \u0026amp; Braze Tool\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/javac-edge-heat-shield-jav-1002\"\u003e\u003cstrong\u003eJAV-1002\u003c\/strong\u003e — Javac Edge Heat Shield Putty\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Javac","offers":[{"title":"Default Title","offer_id":57029880283513,"sku":"JAV-S2","price":40.09,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0158\/3481\/files\/Javac-S2-Self-Fluxing-Silver-Copper-Brazing-Rods-JAV-S2-Ryan-Air-Conditioning-Spares-68981892284791.jpg?v=1775892494"},{"product_id":"silver-solder-ag30","title":"Lawton AG30% Silver Solder Brazing Rods — 500mm","description":"\u003ch2\u003eAG30% Silver Solder Brazing Rods\u003c\/h2\u003e\u003cp\u003e30% silver content brazing rods from Lawton Tubes, supplied in 500mm lengths. A high-performance brazing alloy offering excellent flow, joint strength, and ductility. Suitable for demanding HVAC, refrigeration, and industrial applications where a reliable, high-integrity joint is required.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e30% silver content — high-strength, high-ductility brazing alloy\u003c\/li\u003e\n\u003cli\u003e500mm rod length — standard trade length\u003c\/li\u003e\n\u003cli\u003eExcellent flow and wetting on copper, brass, and steel\u003c\/li\u003e\n\u003cli\u003eProduces strong, leak-free joints suitable for pressurised refrigeration systems\u003c\/li\u003e\n\u003cli\u003ePreferred choice for professional HVAC and refrigeration engineers\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHow to Braze Copper Fittings\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eCut tube square using a pipe cutter or fine hacksaw (32 TPI). Remove burr with file or scraper.\u003c\/li\u003e\n\u003cli\u003eClean outside of copper tube thoroughly with sand cloth or sandpaper to the depth of the fitting. Leave no dark spots.\u003c\/li\u003e\n\u003cli\u003eClean inside of fitting carefully to tube stop with a wire brush. Sand cloth or sandpaper may also be used.\u003c\/li\u003e\n\u003cli\u003eApply heat uniformly around the fitting with a torch. When the brazing rod melts on contact with the heated fitting, the correct brazing temperature has been reached. Remove flame and feed rod to the joint at one or two points until a ring of brazing alloy appears at the end of the fitting.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Always work in a well-ventilated area and follow appropriate safety precautions when brazing.\u003c\/p\u003e","brand":"Lawton Tubes","offers":[{"title":"1.5mm \/ 1 KG \/ Plain","offer_id":57251700507001,"sku":"SOL-S1.5AG30-KG","price":1082.99,"currency_code":"GBP","in_stock":true},{"title":"1.5mm \/ Pack of 5 Rods \/ Plain","offer_id":57251700539769,"sku":"SOL-S1.5AG30-PACK","price":45.99,"currency_code":"GBP","in_stock":false},{"title":"1.5mm \/ Pack of 5 Rods \/ Flux Coated","offer_id":57251700572537,"sku":"SOL-S1.5AG30FC-PACK","price":44.99,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0158\/3481\/files\/Silver-Solder-Pack-of-5-sticks-Ryan-Air-Conditioning-Spares-68944896131447.jpg?v=1775888491"},{"product_id":"silver-solder-ag15","title":"Lawton AG15% Silver Solder Brazing Rods — 500mm","description":"\u003ch2\u003eAG15% Silver Solder Brazing Rods\u003c\/h2\u003e\u003cp\u003e15% silver content brazing rods from Lawton Tubes, supplied in 500mm lengths. A versatile mid-range brazing alloy offering good flow and joint strength for copper, brass, and steel applications in HVAC, refrigeration, and plumbing installations.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e15% silver content — good balance of performance and cost\u003c\/li\u003e\n\u003cli\u003e500mm rod length — standard trade length\u003c\/li\u003e\n\u003cli\u003eSuitable for copper, brass, and mild steel joints\u003c\/li\u003e\n\u003cli\u003eGood wetting and flow characteristics\u003c\/li\u003e\n\u003cli\u003eWidely used in HVAC and refrigeration pipework\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHow to Braze Copper Fittings\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eCut tube square using a pipe cutter or fine hacksaw (32 TPI). Remove burr with file or scraper.\u003c\/li\u003e\n\u003cli\u003eClean outside of copper tube thoroughly with sand cloth or sandpaper to the depth of the fitting. Leave no dark spots.\u003c\/li\u003e\n\u003cli\u003eClean inside of fitting carefully to tube stop with a wire brush. Sand cloth or sandpaper may also be used.\u003c\/li\u003e\n\u003cli\u003eApply heat uniformly around the fitting with a torch. When the brazing rod melts on contact with the heated fitting, the correct brazing temperature has been reached. Remove flame and feed rod to the joint at one or two points until a ring of brazing alloy appears at the end of the fitting.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Always work in a well-ventilated area and follow appropriate safety precautions when brazing.\u003c\/p\u003e","brand":"Lawton Tubes","offers":[{"title":"1.5mm \/ Pack of 5 Rods \/ Plain","offer_id":57251700605305,"sku":"SOL-S1.5AG15-PACK","price":22.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0158\/3481\/files\/Silver-Solder-Pack-of-5-sticks-Ryan-Air-Conditioning-Spares-68944896131447.jpg?v=1775888491"},{"product_id":"silver-solder-ag2","title":"Lawton AG2% Silver Solder Brazing Rods — 500mm","description":"\u003ch2\u003eAG2% Silver Solder Brazing Rods\u003c\/h2\u003e\u003cp\u003e2% silver content brazing rods from Lawton Tubes, supplied in 500mm lengths. A low-silver brazing alloy suitable for copper and brass joints in general plumbing and light HVAC applications where a step up from S2 grade is required without the cost of higher silver content alloys.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e2% silver content — low-cost brazing alloy with improved performance over S2\u003c\/li\u003e\n\u003cli\u003e500mm rod length — standard trade length\u003c\/li\u003e\n\u003cli\u003eSuitable for copper and brass joints\u003c\/li\u003e\n\u003cli\u003eBetter flow and wetting than 0.2% S2 grade\u003c\/li\u003e\n\u003cli\u003eGood for general plumbing and light HVAC pipework\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHow to Braze Copper Fittings\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eCut tube square using a pipe cutter or fine hacksaw (32 TPI). Remove burr with file or scraper.\u003c\/li\u003e\n\u003cli\u003eClean outside of copper tube thoroughly with sand cloth or sandpaper to the depth of the fitting. Leave no dark spots.\u003c\/li\u003e\n\u003cli\u003eClean inside of fitting carefully to tube stop with a wire brush. Sand cloth or sandpaper may also be used.\u003c\/li\u003e\n\u003cli\u003eApply heat uniformly around the fitting with a torch. When the brazing rod melts on contact with the heated fitting, the correct brazing temperature has been reached. Remove flame and feed rod to the joint at one or two points until a ring of brazing alloy appears at the end of the fitting.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Always work in a well-ventilated area and follow appropriate safety precautions when brazing.\u003c\/p\u003e","brand":"Lawton Tubes","offers":[{"title":"2.0mm \/ 1 KG \/ Plain","offer_id":57251700638073,"sku":"SOL-S2.0AG2-KG","price":92.99,"currency_code":"GBP","in_stock":true},{"title":"3.0mm \/ 1 KG \/ Plain","offer_id":57251700670841,"sku":"SOL-S3.0AG2-KG","price":92.99,"currency_code":"GBP","in_stock":true},{"title":"3.0mm \/ Pack of 5 Rods \/ Plain","offer_id":57251700703609,"sku":"SOL-S3.0AG2-PACK","price":14.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0158\/3481\/files\/Silver-Solder-Pack-of-5-sticks-Ryan-Air-Conditioning-Spares-68944896131447.jpg?v=1775888491"},{"product_id":"silver-solder-ag-0-2-s2","title":"Lawton AG 0.2% Silver Solder Brazing Rods (S2) — 500mm","description":"\u003ch2\u003eAG 0.2% Silver Solder Brazing Rods (S2)\u003c\/h2\u003e\u003cp\u003eEntry-level S2 grade brazing rods with 0.2% silver content from Lawton Tubes, supplied in 500mm lengths. Designed for general-purpose brazing of copper and brass where high silver content is not required. A cost-effective solution for non-critical joints in plumbing and light fabrication.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e0.2% silver content (S2 grade) — economical entry-level brazing alloy\u003c\/li\u003e\n\u003cli\u003e500mm rod length — standard trade length\u003c\/li\u003e\n\u003cli\u003eSuitable for copper and brass joints\u003c\/li\u003e\n\u003cli\u003eGood for general plumbing and light fabrication applications\u003c\/li\u003e\n\u003cli\u003eLower cost alternative where high silver content is not specified\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHow to Braze Copper Fittings\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eCut tube square using a pipe cutter or fine hacksaw (32 TPI). Remove burr with file or scraper.\u003c\/li\u003e\n\u003cli\u003eClean outside of copper tube thoroughly with sand cloth or sandpaper to the depth of the fitting. Leave no dark spots.\u003c\/li\u003e\n\u003cli\u003eClean inside of fitting carefully to tube stop with a wire brush. Sand cloth or sandpaper may also be used.\u003c\/li\u003e\n\u003cli\u003eApply heat uniformly around the fitting with a torch. When the brazing rod melts on contact with the heated fitting, the correct brazing temperature has been reached. Remove flame and feed rod to the joint at one or two points until a ring of brazing alloy appears at the end of the fitting.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Always work in a well-ventilated area and follow appropriate safety precautions when brazing.\u003c\/p\u003e","brand":"Lawton Tubes","offers":[{"title":"2.0mm \/ 1 KG \/ Plain","offer_id":57251700736377,"sku":"SOL-S2.0AG0.2-KG","price":28.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0158\/3481\/files\/Silver-Solder-Pack-of-5-sticks-Ryan-Air-Conditioning-Spares-68944896131447.jpg?v=1775888491"},{"product_id":"silver-solder-ag40","title":"Lawton AG40% Silver Solder Brazing Rods — 500mm","description":"\u003ch2\u003eAG40% Silver Solder Brazing Rods\u003c\/h2\u003e\u003cp\u003e40% silver content brazing rods from Lawton Tubes, supplied in 500mm lengths. A premium brazing alloy delivering outstanding flow, strength, and ductility. Ideal for critical HVAC, refrigeration, and industrial joints where maximum performance and reliability are required.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e40% silver content — premium high-strength brazing alloy\u003c\/li\u003e\n\u003cli\u003e500mm rod length — standard trade length\u003c\/li\u003e\n\u003cli\u003eSuperior flow and wetting on copper, brass, and steel\u003c\/li\u003e\n\u003cli\u003eProduces exceptionally strong, leak-free joints for high-pressure refrigeration systems\u003c\/li\u003e\n\u003cli\u003eSuitable for tight clearance joints and complex assemblies\u003c\/li\u003e\n\u003cli\u003ePreferred for critical applications requiring maximum joint integrity\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHow to Braze Copper Fittings\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eCut tube square using a pipe cutter or fine hacksaw (32 TPI). Remove burr with file or scraper.\u003c\/li\u003e\n\u003cli\u003eClean outside of copper tube thoroughly with sand cloth or sandpaper to the depth of the fitting. Leave no dark spots.\u003c\/li\u003e\n\u003cli\u003eClean inside of fitting carefully to tube stop with a wire brush. Sand cloth or sandpaper may also be used.\u003c\/li\u003e\n\u003cli\u003eApply heat uniformly around the fitting with a torch. When the brazing rod melts on contact with the heated fitting, the correct brazing temperature has been reached. Remove flame and feed rod to the joint at one or two points until a ring of brazing alloy appears at the end of the fitting.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Always work in a well-ventilated area and follow appropriate safety precautions when brazing.\u003c\/p\u003e","brand":"Lawton Tubes","offers":[{"title":"1.5mm \/ 1 KG \/ Plain","offer_id":57251701293433,"sku":"SOL-S1.5AG40-KG","price":1427.99,"currency_code":"GBP","in_stock":true},{"title":"1.5mm \/ Pack of 5 Rods \/ Plain","offer_id":57251701326201,"sku":"SOL-S1.5AG40-PACK","price":60.99,"currency_code":"GBP","in_stock":true},{"title":"1.5mm \/ Pack of 5 Rods \/ Flux Coated","offer_id":57251701358969,"sku":"SOL-S1.5AG40FC-PACK","price":59.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0158\/3481\/files\/Silver-Solder-Pack-of-5-sticks-Ryan-Air-Conditioning-Spares-68944896131447.jpg?v=1775888491"},{"product_id":"silver-solder-ag5","title":"Lawton AG5% Silver Solder Brazing Rods — 500mm","description":"\u003ch2\u003eAG5% Silver Solder Brazing Rods\u003c\/h2\u003e\u003cp\u003e5% silver content brazing rods from Lawton Tubes, supplied in 500mm lengths. A cost-effective general-purpose brazing alloy suitable for copper, brass, and steel joints in plumbing and light HVAC applications where lower silver content is acceptable.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e5% silver content — economical general-purpose brazing alloy\u003c\/li\u003e\n\u003cli\u003e500mm rod length — standard trade length\u003c\/li\u003e\n\u003cli\u003eSuitable for copper, brass, and mild steel joints\u003c\/li\u003e\n\u003cli\u003eGood flow characteristics at lower cost than higher silver grades\u003c\/li\u003e\n\u003cli\u003eIdeal for non-critical plumbing and light fabrication work\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHow to Braze Copper Fittings\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eCut tube square using a pipe cutter or fine hacksaw (32 TPI). Remove burr with file or scraper.\u003c\/li\u003e\n\u003cli\u003eClean outside of copper tube thoroughly with sand cloth or sandpaper to the depth of the fitting. Leave no dark spots.\u003c\/li\u003e\n\u003cli\u003eClean inside of fitting carefully to tube stop with a wire brush. Sand cloth or sandpaper may also be used.\u003c\/li\u003e\n\u003cli\u003eApply heat uniformly around the fitting with a torch. When the brazing rod melts on contact with the heated fitting, the correct brazing temperature has been reached. Remove flame and feed rod to the joint at one or two points until a ring of brazing alloy appears at the end of the fitting.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Always work in a well-ventilated area and follow appropriate safety precautions when brazing.\u003c\/p\u003e","brand":"Lawton Tubes","offers":[{"title":"1.5mm \/ 1 KG \/ Plain","offer_id":57251701391737,"sku":"SOL-S1.5AG5-KG","price":196.99,"currency_code":"GBP","in_stock":true},{"title":"2.0mm \/ 1 KG \/ Plain","offer_id":57251701424505,"sku":"SOL-S2.0AG5-KG","price":196.99,"currency_code":"GBP","in_stock":true},{"title":"2.5mm \/ 1 KG \/ Plain","offer_id":57251701457273,"sku":"SOL-S2.5AG5-KG","price":196.99,"currency_code":"GBP","in_stock":true},{"title":"3.0mm \/ 1 KG \/ Plain","offer_id":57251701490041,"sku":"SOL-S3.0AG5-KG","price":196.99,"currency_code":"GBP","in_stock":true},{"title":"3.0mm \/ Pack of 5 Rods \/ Plain","offer_id":57251701522809,"sku":"SOL-S3.0AG5-PACK","price":30.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0158\/3481\/files\/Silver-Solder-Pack-of-5-sticks-Ryan-Air-Conditioning-Spares-68944896131447.jpg?v=1775888491"},{"product_id":"silver-solder-ag56","title":"Lawton AG56% Silver Solder Brazing Rods — 500mm, Flux Coated","description":"\u003ch2\u003eAG56% Silver Solder Brazing Rods\u003c\/h2\u003e\u003cp\u003eProfessional-grade 56% silver content brazing rods from Lawton Tubes, supplied in 500mm lengths. Suitable for brazing copper tube and solder-type fittings in HVAC, refrigeration, and plumbing installations. Available flux coated for cleaner, faster joints.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e56% silver content for high-strength, leak-free joints\u003c\/li\u003e\n\u003cli\u003e500mm rod length — standard trade length\u003c\/li\u003e\n\u003cli\u003eFlux coated option eliminates need for separate flux application\u003c\/li\u003e\n\u003cli\u003eSuitable for copper-to-copper and copper-to-brass joints\u003c\/li\u003e\n\u003cli\u003eMeets requirements for HVAC refrigeration pipework brazing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHow to Braze Copper Fittings\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003eCut tube square using a pipe cutter or fine hacksaw (32 TPI). Remove burr with file or scraper.\u003c\/li\u003e\n\u003cli\u003eClean outside of copper tube thoroughly with sand cloth or sandpaper to the depth of the fitting. Leave no dark spots.\u003c\/li\u003e\n\u003cli\u003eClean inside of fitting carefully to tube stop with a wire brush. Sand cloth or sandpaper may also be used.\u003c\/li\u003e\n\u003cli\u003eApply heat uniformly around the fitting with a torch. When the brazing rod melts on contact with the heated fitting, the correct brazing temperature has been reached. Remove flame and feed rod to the joint at one or two points until a ring of brazing alloy appears at the end of the fitting.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Always work in a well-ventilated area and follow appropriate safety precautions when brazing.\u003c\/p\u003e","brand":"Lawton Tubes","offers":[{"title":"2.0mm \/ Pack of 5 Rods \/ Flux Coated","offer_id":57251701555577,"sku":"SOL-S2.0AG56FC-PACK","price":152.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0158\/3481\/files\/Silver-Solder-Pack-of-5-sticks-Ryan-Air-Conditioning-Spares-68944896131447.jpg?v=1775888491"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0158\/3481\/collections\/Silver-Solder-Pack-of-5-sticks-Ryan-Air-Conditioning-Spares-68944896131447.jpg?v=1779436446","url":"https:\/\/www.airconspares.com\/collections\/brazing-soldering-rods.oembed","provider":"Airconspares.com","version":"1.0","type":"link"}