{"product_id":"mastercool-lever-type-tube-bender-5-8-o-d","title":"Mastercool 70065 — Lever-Type Tube Bender 5\/8\" O.D. (1\/2\" Nominal)","description":"\u003ch2\u003eMastercool 70065 Lever-Type Tube Bender - 5\/8\" O.D.\u003c\/h2\u003e\n\u003cp\u003eProfessional lever-type tube bender designed for bending 5\/8\" O.D. copper tubing (1\/2\" nominal) up to 180° without kinking or flattening. Open-side design slips over tube at any point, making it perfect for working with pre-installed tubing. Makes smooth short radius bends with minimum effort. Features calibrated scale to show angle of bend for precise tube routing. Radius to centre of tube: 2 1\/4\". Essential tool for HVAC\/R technicians, plumbers, and professional installers who need to create accurate bends in copper tubing.\u003c\/p\u003e\n\u003ch2\u003eKey Features:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLever-type tube bender for 5\/8\" O.D. tubing\u003c\/li\u003e\n\u003cli\u003eBends up to 180°\u003c\/li\u003e\n\u003cli\u003eOpen-side design slips over tube at any point\u003c\/li\u003e\n\u003cli\u003eCalibrated angle scale\u003c\/li\u003e\n\u003cli\u003eShort radius bends with minimum effort\u003c\/li\u003e\n\u003cli\u003ePrevents kinking and flattening\u003c\/li\u003e\n\u003cli\u003eEasy tube insertion at any point\u003c\/li\u003e\n\u003cli\u003eHeavy-duty construction\u003c\/li\u003e\n\u003cli\u003eProfessional-grade quality\u003c\/li\u003e\n\u003cli\u003ePrecise bend control\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eModel: 70065\u003c\/li\u003e\n\u003cli\u003eOutside Diameter of Tubing: 5\/8\"\u003c\/li\u003e\n\u003cli\u003eNominal Size: 1\/2\"\u003c\/li\u003e\n\u003cli\u003eRadius to Centre of Tube: 2 1\/4\"\u003c\/li\u003e\n\u003cli\u003eMaximum Bend Angle: 180°\u003c\/li\u003e\n\u003cli\u003eType: Lever-type tube bender\u003c\/li\u003e\n\u003cli\u003eDesign: Open-side\u003c\/li\u003e\n\u003cli\u003eFeatures: Calibrated angle scale\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eHow to Bend Copper Pipe with a Hand Bender:\u003c\/h2\u003e\n\u003ch3\u003e1. Prepare the Pipe and Bender\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eClean and deburr:\u003c\/strong\u003e Clean the end of the pipe of any rough edges from cutting.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMark the bend point:\u003c\/strong\u003e Use a permanent marker to mark the desired bend location on the outside of the pipe. You can use a piece of scrap pipe to help find the correct spot for the outside edge.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAlign the pipe:\u003c\/strong\u003e Place the pipe into the bender, ensuring the mark you made is aligned with the bender's guide mark (which represents the centre of the bend).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSecure the pipe:\u003c\/strong\u003e Close the stop or other locking mechanism on the bender to hold the pipe firmly in place.\u003c\/p\u003e\n\u003ch3\u003e2. Make the Bend\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eApply steady pressure:\u003c\/strong\u003e Bend the pipe using the bender's handles. Apply steady, consistent pressure to create a smooth bend.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWatch the angle:\u003c\/strong\u003e Use the bender's calibration to ensure you are bending to the correct angle. Many benders bend slightly past the target angle, so be prepared to adjust for springback.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAccount for springback:\u003c\/strong\u003e Bend the pipe a little further than the final required angle, as the pipe will spring back slightly when the pressure is released.\u003c\/p\u003e\n\u003ch3\u003e3. Finish and Adjust\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eRelease the pressure:\u003c\/strong\u003e Gently release the pressure from the bender.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCheck the angle:\u003c\/strong\u003e Check the angle. If it's not perfect, you can use the bender to make small adjustments to reach the exact angle required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMake a second bend (if needed):\u003c\/strong\u003e If you need to make a second bend, measure the distance between the centre of the first bend and the desired location of the second bend and repeat the process. You can use an offcut to ensure the second bend is accurate.\u003c\/p\u003e\n\u003ch2\u003eApplications:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRefrigeration line bending\u003c\/li\u003e\n\u003cli\u003eA\/C system installations\u003c\/li\u003e\n\u003cli\u003ePlumbing installations\u003c\/li\u003e\n\u003cli\u003eCopper tubing routing\u003c\/li\u003e\n\u003cli\u003eHVAC installations\u003c\/li\u003e\n\u003cli\u003eProfessional service work\u003c\/li\u003e\n\u003cli\u003eWorkshop use\u003c\/li\u003e\n\u003cli\u003eCustom tube fabrication\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eBenefits:\u003c\/h2\u003e\n\u003cp\u003eLever-type tube bender creates smooth, professional short radius bends in 5\/8\" O.D. copper tubing without kinking or flattening - essential for maintaining proper flow and system performance. Open-side design slips over tube at any point, making it perfect for working with pre-installed tubing where you need to create bends without disconnecting the tube. Makes smooth bends with minimum effort thanks to the lever mechanism. Calibrated scale shows angle of bend for precise tube routing and professional installations. Bends up to 180° for maximum flexibility in tube routing applications. Radius to centre of tube is 2 1\/4\", providing a short radius bend that's ideal for tight spaces. Heavy-duty construction withstands demanding professional use and ensures long service life. Perfect for HVAC\/R technicians installing refrigeration lines, plumbers routing copper pipework, and professional installers who need precise tube bending capability. The 5\/8\" O.D. (1\/2\" nominal) size is one of the most common refrigeration line sizes in residential and commercial A\/C systems. Professional-grade quality delivers consistent results job after job. Essential tool for any technician who regularly works with 5\/8\" copper tubing and needs to create accurate bends.\u003c\/p\u003e\n\u003ch2\u003eAvailable Sizes:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e70061: 1\/4\" O.D. (1\/8\" nominal) - Radius 9\/16\"\u003c\/li\u003e\n\u003cli\u003e70062: 5\/16\" O.D. - Radius 11\/16\"\u003c\/li\u003e\n\u003cli\u003e70063: 3\/8\" O.D. (1\/4\" nominal) - Radius 15\/16\"\u003c\/li\u003e\n\u003cli\u003e70064: 1\/2\" O.D. (3\/8\" nominal) - Radius 1 1\/2\"\u003c\/li\u003e\n\u003cli\u003e70065: 5\/8\" O.D. (1\/2\" nominal) - Radius 2 1\/4\"\u003c\/li\u003e\n\u003cli\u003e70066: 3\/4\" O.D. (5\/8\" nominal) - Radius 3\"\u003c\/li\u003e\n\u003cli\u003e70067: 7\/8\" O.D. (3\/4\" nominal) - Radius 3\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLever-type tube bender for 5\/8\" O.D. copper tubing. Open-side design slips over tube at any point. Bends up to 180°. Calibrated angle scale. Short radius bends with minimum effort.\u003c\/p\u003e","brand":"Mastercool","offers":[{"title":"Default Title","offer_id":57029561549177,"sku":"70065","price":65.4,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0984\/0158\/3481\/files\/Mastercool-Lever-Type-Tube-Bender-5-8-O-D-Ryan-Air-Conditioning-Spares-68945176854903.jpg?v=1775889232","url":"https:\/\/www.airconspares.com\/products\/mastercool-lever-type-tube-bender-5-8-o-d","provider":"Airconspares.com","version":"1.0","type":"link"}