Daikin Perfera CVXM20B 2.0kW Floor Standing Multi-Split Indoor Unit

Daikin Perfera CVXM20B 2.0kW Floor Standing Multi-Split Indoor Unit

The Daikin CVXM20B is a 2.0kW floor standing indoor unit from the Perfera range, built for use on a Daikin multi-split outdoor condenser (such as the 2MXM, 3MXM, 4MXM or 5MXM series, sold separately) alongside other indoor units. Its slim, low-level cabinet sits discreetly at skirting height, making it a practical alternative to a wall-mounted unit where wall space is limited.

Supplied as the indoor unit only, for connection to a compatible Daikin multi-split outdoor unit by an F-Gas certified installation company.

Key Features

• 2.0kW nominal indoor unit, floor standing format
• Slim profile: only 238mm deep
• R-32 refrigerant
• Sound pressure from 22 dBA on quiet mode (cooling)
• 4-speed fan operation (High / Medium / Low / Quiet)
• Designed for connection to a Daikin multi-split outdoor unit alongside other indoor units

Benefits

• Discreet, low-level installation — ideal where wall or ceiling space is unavailable, or where a traditional radiator-height unit is preferred.
• Whisper-quiet operation — indoor sound pressure from 22 dBA on the lowest fan speed makes it suitable for bedrooms and living spaces.
• Part of a multi-room system — combine with other Daikin Perfera indoor units on a single multi-split outdoor unit for independent room-by-room control.
• R-32 refrigerant — lower environmental impact than older refrigerants.

Suitable Applications

• Living rooms and bedrooms where wall-mounted units are impractical
• Multi-room installations alongside other Perfera indoor units
• Rooms with large glazed areas or limited wall space
• Replacement for traditional radiator positions

Technical Specifications

Outdoor unit dimensions, weight, SEER/SCOP and energy label depend on the multi-split outdoor unit selected and the combination of connected indoor units, and are listed on that outdoor unit's own product page.

Room Size Guide

As a general guide, the 2.0kW CVXM20B is suitable for rooms of approximately 12–20 m², subject to insulation standard, glazing, ceiling height, solar gain and occupancy. For commercial applications or rooms with unusual characteristics, a qualified engineer should carry out a full heat load calculation in accordance with CIBSE guidance.

What's Included

• Daikin Perfera floor standing indoor unit: CVXM20B
• Infrared remote controller
• Manufacturer documentation

Multi-split outdoor unit, pipework and installation materials are sold separately.

Recommended Installation Accessories

To complete the installation, your engineer will typically require the following — all available from Airconspares:

• Pair coil — pre-insulated refrigerant pipework in the correct diameter for this unit (1/4" liquid / 3/8" gas)
• Wall brackets or ground mounting feet — for the paired multi-split outdoor unit
• Anti-vibration mounts — to reduce structure-borne noise from the outdoor unit
• Condensate pump — required where gravity drainage from the indoor unit is not available (Aspen Mini Orange or equivalent)
• Condensate drain hose — flexible hose for indoor unit drainage
• Local isolator switch — required by Part P of the Building Regulations
• Interconnecting cable — sized to the installation manual, to connect indoor and outdoor units

Pipework Installation Bundles

This unit requires 1/4" liquid and 3/8" gas line copper pipework. We offer pre-matched installation bundles containing Lawton ACR copper coil, Armaflex EVO insulation, forged brass flare nuts and a Mastercool flaring tool — everything your engineer needs for the pipe run, in one order:

• AC Copper Pipe Installation Bundle — 1/4" — liquid line (6.35mm) | available in 6m, 15m & 30m
• AC Copper Pipe Installation Bundle — 3/8" — gas line (9.53mm) | available in 6m, 15m & 30m

Frequently Asked Questions

Does this listing include an outdoor unit?
No. This listing is for the CVXM20B indoor unit only. A compatible Daikin multi-split outdoor unit is sold separately.

Can this be used on a mono-split system?
The CVXM20B is designed for multi-split outdoor units. For a single-room mono-split installation, see the equivalent FVXM-series floor standing indoor unit.

Does this system include installation?
No. This listing is for the equipment only. Installation must be carried out by an appropriately F-Gas certified installation company.

What refrigerant does this system use?
R32. This is a lower global warming potential refrigerant compared to R410A. Handling requires F-Gas certification.

Can this unit heat as well as cool?
Yes, when connected to a Daikin multi-split heat pump outdoor unit, the CVXM20B provides both cooling and heating.

What size room is this suitable for?
As a general guide, 12–20 m². However, room sizing depends on multiple factors. A heat load calculation is recommended for accurate sizing.

What pipe sizes does this unit require?
1/4" (6.4 mm) liquid line and 3/8" (9.5 mm) gas line.

How quiet is this unit?
From 22 dBA in cooling mode on the quiet fan setting, rising to 38 dBA on high fan speed.

Is a local isolator required?
Yes. A local isolator switch is required by Part P of the Building Regulations and should be installed by a qualified electrician.

Professional Installation Required

This air conditioning indoor unit must be installed and commissioned as part of a complete multi-split system by an appropriately F-Gas certified installation company. Installation, pipework, electrical connection and commissioning are not included in this listing unless separately agreed in writing. Handling of R32 refrigerant requires appropriate F-Gas certification under UK F-Gas Regulations.

Manufacturer Resources

For full manufacturer documentation, visit the official Daikin Perfera floor standing page.