Hidrox Descaler & Colour Ind. 5L
£105.09
Sale price
£105.09
Regular price
Skip to product information
Hidrox Descaler & Colour Ind. 5L
- UK stock – fast dispatch
- UK Mainland Delivery £7.50
- Expert technical support
- Trade accounts available
£105.09
Sale price
£105.09
Regular price
Shipping calculated at checkout.
REFcom Elite registered supplier
Achilles Silver accredited supplier
UK HVAC specialist since 2005
Fast UK dispatch
✓ Trade Pricing | ✓ Technical Support Available | ✓ Secure Checkout
Hidrox™ — Internal Pipework Limescale Remover
Hidrox™ is a descaling treatment for use on closed water systems and cooling towers. By removing all scale and slime, its advanced formulation effectively cleans the entire open water side of a system, increasing the system's efficiency. A pH indicator dye shows when the descaling process is complete.
Key Features
- For cooling towers, pipework, condensers, water heaters and cast-iron indoor boilers
- Contains inhibitors to protect metal surfaces
- Colour indicator to ensure continued protection
- Ready to use
- Condensate pump safe
- 1L makes 34 litres
Special Features
- Colour indicator to ensure correct usage — water turns red when added, changes to yellow as scale dissolves; add more until water turns red again
Product Specification
- Product Codes: S010208GB (1L), S010168GB (5L)
- Packing Quantity: 12 x 1 Litre / 4 x 5 Litre
- Packing Size (L x H x D cm): 36.5 x 25 x 27.5 (1L) / 40 x 30 x 27 (5L)
- Shipping Weight: 18.75kg (1L case) / 31.24kg (5L case)
- Soils: Scale, Slime, Algae
- UFI: UN1760
Directions for Use
- Dose: Add 3 litres of Hidrox™ for each 100 litres of system water (100:3 ratio).
- Wait: Allow system to operate normally for 24 to 48 hours with the bleed line turned off, then drain the whole system.
- Inspect: For systems that cannot be drained after Hidrox™ treatment, increase bleed rate to 2 or 3 times normal — or dilute unused Hidrox™ and flush out system.
- Drain: Allow system water to circulate until it changes again to yellow. Repeat process until system water remains red.
Before using Hidrox™, check its suitability on galvanised surfaces by making a 50/50 solution with water and dabbing on a non-critical surface. If no discolouration occurs, it is safe to continue. Otherwise contact Advanced Engineering.
Safety Information
Danger — Contains: Phosphoric Acid (UN1760)
EUH208 · H314 · P262 · P264 · P280 · P301+P330+P331 · P303+P361+P353 · P305+P351+P338. Contains Inhibitor. May produce an allergic reaction. Safety data sheet available on request.