Inaba Denko Slimduct 100mm White | Pack of 10 × 2m Lengths | ID-NSD-100-W
Inaba Denko Slimduct 100mm White | Pack of 10 × 2m Lengths | ID-NSD-100-W
Inaba Denko Slimduct 100mm White — Pack of 10 × 2m Lengths
The Inaba Denko Slimduct is the industry-standard trunking solution for concealing and protecting refrigerant pipework, electrical cables, and drain lines on split system air conditioning and heat pump installations. This pack contains 10 × 2m lengths (20m total) of 100mm white Slimduct, supplied under part number ID-NSD-100-W.
The slim, low-profile design sits neatly against walls and is suitable for both indoor and outdoor applications. UV-resistant, fire-rated, and paintable, Slimduct delivers a clean, professional finish that meets the demands of trade installations.
Key Features
- Pack of 10 × 2m lengths — 20m total per pack
- 100mm width, 70mm depth — suitable for larger line sets and multi-pipe runs
- White finish — paintable for a seamless match to any building exterior
- UV resistant — designed for long-term outdoor use
- Fire rated — suitable for use in demanding installation environments
- Indoor and outdoor use — versatile for all installation types
- Accommodates refrigerant pipes, electrical cables, and drain lines
- Compatible with the complete Inaba Denko Slimduct accessory range — vertical elbows, flat elbows, couplers, reducers, wall covers, T-joints, duct ends, and more
Applications
- Split system and multi-split air conditioning installations
- Heat pump line set protection and concealment
- Residential and light commercial HVAC installations
- Any application requiring a neat, professional trunking solution
Technical Specifications
| Specification | Value |
|---|---|
| Part Number | ID-NSD-100-W |
| Width | 100mm |
| Depth | 70mm |
| Length per piece | 2000mm (2m) |
| Pack quantity | 10 pieces |
| Total length per pack | 20m |
| Colour | White |
| Finish | Paintable |
| UV resistant | Yes |
| Fire rated | Yes |
| Suitable for | Indoor and outdoor use |
Compatible Accessories
The Slimduct 100mm range is compatible with the full Inaba Denko accessory system, including:
- Vertical elbows and flat elbows
- Inside and outside corners
- Couplers and joiners
- Reducers (100mm to 75mm)
- Wall covers
- T-joints
- Duct ends
Frequently Asked Questions
What size line set does 100mm Slimduct accommodate?
The 100mm Slimduct (70mm depth) is suitable for larger line sets and multi-pipe runs, typically accommodating two refrigerant pipes plus a drain line and electrical cable. For smaller single-split installations, the 75mm Slimduct may be sufficient.
Can Slimduct be painted?
Yes — the white finish is paintable, allowing the trunking to be matched to any wall colour for a seamless, professional appearance.
Can Slimduct be used outdoors?
Yes — Inaba Denko Slimduct is UV-resistant and fire-rated, designed for long-term use in both indoor and outdoor environments.
How many lengths do I need?
Measure the total run from your indoor unit to the outdoor unit, adding extra for any bends or offsets. Each length is 2m and this pack contains 10 lengths (20m total). For most domestic installations, one pack is sufficient.
What other colours are available?
The 100mm Slimduct is also available in Ivory (ID-NSD-100-I), Black (ID-SD-100-K), Brown (ID-SD-100-B), and Anthracite (ID-SD-100-A). Note that pack quantities vary by colour.